Mohawk Technology Careers
Current Openings:
-
We are seeking a highly motivated Electrical Technician to join our growing team at our Mohawk, MI office. The Electrical Technician will work closely with Controls Engineers and the Electrical Team to build and install electrical systems. In this role, you will play a key part in the fabrication and installation of electrical systems for our projects. You will leverage your electrical expertise to build, install, and troubleshoot industrial control systems.
Role and Responsibilities:
Build industrial control panels, wire machines, and robot cells
Work with multiple voltages including 480VAC, 120VAC, and 24VDC
Lay out, drill, tap, and assemble electrical sub-panels and enclosures
Assist in the startup, commissioning and troubleshooting of new or existing equipment
Work with PLCs, VFDs, HMIs, and various sensors
Read electrical schematics and document changes with redlines
Must satisfactorily comply with alcohol and controlled substance company policies
Operate forklifts, trucks, and trailers
Occasional travel estimated at 20%
Other duties as assigned
Physical Requirements:
Walking, standing, going up and down stairs, sitting, kneeling, crouching, bending for extended periods
Ability to lift and carry up to 25 pounds on a regular basis and heavier weights on an infrequent basis
Comfortable working at heights (e.g., on ladders or lifts)
Safely work with and around electrical control panels
Ability to work in a fast-paced environment
Working in varying temperatures while on-site
Wearing PPE complying with the customer’s and Mohawk Technology’s safety standards, including safety-toed boots, hard hat, safety glasses, ear plugs, hair nets, and smocks
Moving around facilities on-site on a frequent basis, which can be very large with multiple floors and rooms
Working Hours:
Typical office hours:
8 am – 5 pm
Occasional nights and weekends
On-site hours:
Hours may vary, but are typically 12+
Occasional nights and weekends
Preferred Knowledge and Skills:
Read, interpret, and redline schematic drawings
Associate Electrical degree or equivalent work experience
Minimum 1 year of experience installing and maintaining electrical systems
Knowledge of NEC, UL, OSHA & NFPA standards
Pay Range:
Negotiable, based on experience
Benefits:
Health insurance
Health Savings Account (with eligible health insurance plan)
Vision insurance
Dental insurance
Short-term disability insurance
401(k) plan with up to 4% match
PTO
Holidays
Profit sharing
Sabbatical
-
We are seeking a highly motivated Process Engineer to join our growing team. The Process Engineer will work closely with other Process Engineers, Controls Engineers, Process Installation and Fabrication, vendors, and customers. In this role, you will play a key role in developing, implementing, and improving manufacturing processes in food and dairy plants across the country. You will leverage your engineering expertise to design and implement custom dairy processing solutions.
Role and Responsibilities:
Work with the project team to develop and implement customer-driven manufacturing process improvements.
Analyze and optimize existing dairy processing systems to increase efficiency, yield, and product quality.
Collaborate with all groups in our team, including controls/automation, mechanical, fabrication and installation.
Specify, create, and manage the bill of materials for our systems
Use AutoCAD Plant 3D to create 2D process and instrumentation diagrams as well as 3D models
Work with customers to clearly understand and define the solution we are providing them.
Work closely with vendors to specify and order the components for our systems.
Assist senior engineers in the execution and installation of systems of all types and sizes.
Stay up-to-date on industry trends and best practices in dairy process engineering.
Ensure compliance with all safety and quality standards (3-A, FDA, PMO, ANSI, ASME)
Operate forklifts, trucks, and trailers
Must satisfactorily comply with alcohol and controlled substance company policies
Travel 30% of the time
Within the continental United States (CONUS) majority of the time and rarely outside of the CONUS
Typically for 9 days at a time, but could be shorter or longer based on project need
Driving a vehicle to customer and/or Mohawk Technology locations
Flying to customer locations
Other duties as assigned
Physical Requirements:
Walking, standing, going up and down stairs, sitting, kneeling, crouching, bending for extended periods
Ability to lift and carry up to 25 pounds on a regular basis and heavier weights on an infrequent basis
Ability to work in a fast-paced environment
Working in varying temperatures while on-site
Wearing PPE complying with the customer’s and Mohawk Technology’s safety standards, including safety-toed boots, hard hat, safety glasses, ear plugs, hair nets, and smocks
Moving around facilities on-site on a frequent basis, which can be very large with multiple floors and rooms
Working Hours:
Typical office hours:
8 am – 5 pm
Occasional nights and weekends
On-site hours:
Hours may vary, but are typically 12+
Occasional nights and weekends
Preferred Knowledge and Skills:
Bachelor's degree in Mechanical Engineering, Industrial Engineering, or related experience.
Experience working in a sanitary manufacturing environment.
Basic experience in AutoCAD or equivalent for creating/modifying process schematics
Ability to read/understand blueprints and fabrication drawings
Understanding of fluid dynamics, pump sizing, and heat transfer related to piping systems
3D Modeling/Piping Experience
2D Process and Instrument Drawings Experience
Knowledge of design and fabrication of stainless steel equipment
Project management experience/skills
Excellent verbal and written communication skills
Experience with Microsoft products
Knowledge of Food/Dairy Industry
Pay Range:
$50k - 80k based on experience
Benefits:
Health insurance
Health Savings Account (with eligible health insurance plan)
Vision insurance
Dental insurance
Short-term disability insurance
401(k) plan with up to 4% match
PTO
Holidays
Profit sharing
Sabbatical
-
We are seeking a highly motivated Senior Process Engineer to join our growing team. The Senior Process Engineer will work closely with other Process Engineers, Controls Engineers, Process Installation and Fabrication, vendors, and customers. In this role, you will play a key leadership role in developing, implementing, and improving manufacturing systems in food and dairy plants across the country. You will leverage your engineering expertise to identify areas for improvement, troubleshoot problems, and ensure our operations run smoothly and efficiently.
Role and Responsibilities:
Lead the development and implementation of customer-driven manufacturing process improvements.
Analyze and optimize existing dairy processing systems to increase efficiency, yield, and product quality.
Understand risks and troubleshoot problems on plant’s manufacturing systems.
Specify, create, and manage the bill of materials for our systems
Use AutoCAD Plant 3D to create 2D process and instrumentation diagrams as well as 3D models
Work with customers to clearly understand and define the solution we are providing them.
Work closely with vendors to specify and order the components for our systems.
Support sales team by acting as a technical resource for quotes
Collaborate with all groups in our team, including controls/automation, robotics, fabrication, and installation.
Provide technical expertise and guidance to junior process engineers.
Manage execution and installation of systems of all types and sizes.
Stay up-to-date on industry trends and best practices in dairy process engineering.
Ensure compliance with all safety and quality standards (3-A, FDA, PMO, ANSI, ASME)
Operate forklifts, trucks, and trailers
Must satisfactorily comply with alcohol and controlled substance company policies
Travel 30% of the time
Within the continental United States (CONUS) majority of the time and rarely outside of the CONUS
Typically for 9 days at a time, but could be shorter or longer based on project need
Driving a vehicle to customer and/or Mohawk Technology locations
Flying to customer locations
Other duties as assigned
Physical Requirements:
Walking, standing, going up and down stairs, sitting, kneeling, crouching, bending for extended periods
Ability to lift and carry up to 25 pounds on a regular basis and heavier weights on an infrequent basis
Ability to work in a fast-paced environment
Working in varying temperatures while on-site
Wearing PPE complying with the customer’s and Mohawk Technology’s safety standards, including safety-toed boots, hard hat, safety glasses, ear plugs, hair nets, and smocks
Moving around facilities on-site on a frequent basis, which can be very large with multiple floors and rooms
Working Hours:
Typical office hours:
8 am – 5 pm
Occasional nights and weekends
On-site hours:
Hours may vary, but are typically 12+
Occasional nights and weekends
Preferred Knowledge and Skills:
Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field.
5+ years of experience in a sanitary manufacturing environment as a Process Engineer.
Proven experience in manufacturing system optimization, troubleshooting, and root cause analysis.
Excellent analytical and problem-solving skills.
Effective communication, collaboration, and interpersonal skills.
Project management experience/skills
Experience with Microsoft products
Knowledge of Food/Dairy Industry
Experience in 2D and 3D AutoCAD or similar for process and instrumentation diagrams, piping/installation models and more.
Ability to read/understand blueprints and fabrication drawings
Understanding of fluid dynamics, pump sizing, and heat transfer related to piping systems
Knowledge of design and fabrication of stainless steel equipment
Pay Range:
$80k - $100k+ based on experience
Benefits:
Health insurance
Health Savings Account (with eligible health insurance plan)
Vision insurance
Dental insurance
Short-term disability insurance
401(k) plan with up to 4% match
PTO
Holidays
Profit sharing
Sabbatical
-
We are seeking a skilled Process Installation Welder to join our team at our Frederic, WI shop (soon to be located in Siren, WI). This position requires full-time travel to customer sites. The Process Installation Welder will be responsible for performing high-quality sanitary stainless TIG welding and tube fitting on process systems at customer sites. This role requires strong technical skills, attention to detail, and the ability to work effectively in a team environment. You will play a crucial role in ensuring projects are completed to the highest quality standards.
Must be willing and able to relocate to the Frederic/Siren, WI area.
Role and Responsibilities:
Pipe fitting and sanitary stainless TIG welding
Read and fabricate systems from P&ID drawings
Operate forklifts, trucks, and trailers
Must satisfactorily comply with alcohol and controlled substance company policies
Full-time travel required
Other duties as assigned
Physical Requirements:
Ability to lift and carry heavy objects (e.g., pipes, fittings, welding equipment)
Ability to work in various positions (e.g., bending, kneeling, reaching)
Comfortable working at heights (e.g., on ladders or lifts)
Ability to work in varying temperatures and environments (e.g., construction sites, manufacturing floors)
Walking, standing, going up and down stairs, sitting, kneeling, crouching, bending for extended periods
Ability to work in a fast-paced environment
Ability to work in confined spaces
Good manual dexterity and hand-eye coordination
Wearing PPE complying with the customer’s and Mohawk Technology’s safety standards, including safety-toed boots, hard hat, safety glasses, ear plugs, hair nets, and smocks
Moving around facilities on-site on a frequent basis, which can be very large with multiple floors and rooms
Working Hours:
9 days on/5 days off rotation (Tues – Wed)
10-12+ hour shifts
Occasional nights
Preferred Knowledge and Skills:
Willing to train the right candidate
High school diploma
Pay Range:
Negotiable, based on experience
Benefits:
Health insurance
Health Savings Account (with eligible health insurance plan)
Vision insurance
Dental insurance
Short-term disability insurance
401(k) plan with up to 4% match
PTO
Holidays
Profit sharing
Sabbatical
-
We are seeking an experienced and dedicated Senior Process Installation Welder/Fitter to join our team at our Frederic, WI shop (soon to be located in Siren, WI). This position requires full-time travel to customer sites. The Senior Process Installation Welder/Fitter will be a key member of the process installation team, responsible for performing high-quality sanitary stainless TIG welding and tube fitting on process systems at customer sites. This role demands advanced technical skills, meticulous attention to detail, and the ability to work independently as well as collaboratively within a team environment. The Senior Process Installation Welder/Fitter will also provide guidance and mentorship to less experienced team members. You will be instrumental in the successful execution of process installation projects, contributing directly to the overall project success and customer satisfaction.
Must be willing and able to relocate to the Frederic/Siren, WI area.
Role and Responsibilities:
Work collaboratively with customers, project managers, and engineers
Ensure quality control and that installations meet project specifications
Proactively identify and resolve potential issues or delays related to welding/fitting on the job site
Train and mentor other team members
Pipe fitting and sanitary stainless TIG welding
Read and fabricate systems from P&ID drawings
Must satisfactorily comply with alcohol and controlled substance company policies
Operate forklifts, trucks, and trailers
Full-time position 9 days on 5 days off rotation
Full-time travel required
Other duties as assigned
Physical Requirements:
Ability to lift and carry heavy objects (e.g., pipes, fittings, welding equipment)
Ability to work in various positions (e.g., bending, kneeling, reaching)
Comfortable working at heights (e.g., on ladders or lifts)
Ability to work in varying temperatures and environments (e.g., construction sites, manufacturing floors)
Walking, standing, going up and down stairs, sitting, kneeling, crouching, bending for extended periods
Ability to work in a fast-paced environment
Ability to work in confined spaces
Good manual dexterity and hand-eye coordination
Wearing PPE complying with the customer’s and Mohawk Technology’s safety standards, including safety-toed boots, hard hat, safety glasses, ear plugs, hair nets, and smocks
Moving around facilities on-site on a frequent basis, which can be very large with multiple floors and rooms
Working Hours:
9 days on/5 days off rotation (Tues – Wed)
10-12+ hour shifts
Occasional nights
Preferred Knowledge and Skills:
High school diploma
About 5+ years of pipe fitting and sanitary welding experience
Pay Range:
Negotiable, based on experience
Benefits:
Health insurance
Health Savings Account (with eligible health insurance plan)
Vision insurance
Dental insurance
Short-term disability insurance
401(k) plan with up to 4% match
PTO
Holidays
Profit sharing
Sabbatical
-
We are seeking a motivated and enthusiastic Mechanical Engineering Intern to join our Mechanical Engineering team at our Mohawk, MI office. This internship offers a valuable opportunity to gain hands-on experience in the industrial automation and manufacturing industry, working alongside experienced engineers on real-world projects. The ideal candidate will have a strong foundation in mechanical engineering principles and a genuine desire to learn and contribute.
Role and Responsibilities:
Assist in the design and development of mechanical systems and components for industrial automation equipment
Create and modify 3D CAD models of mechanical parts, assemblies, and fabrications using SolidWorks
Generate detailed assembly drawings and fabrication drawings
Perform engineering calculations and analyses to support design decisions
Collaborate with engineers and other team members to solve design challenges
Participate in design reviews and contribute to continuous improvement efforts
Assist with testing and prototyping of mechanical systems
Document design processes and results
Support manufacturing and assembly processes by providing technical assistance
Must satisfactorily comply with alcohol and controlled substance company policies
Adhere to all safety protocols and procedures
Operate forklifts, trucks, and trailers
Occasional travel
Other duties as assigned
Physical Requirements:
Ability to sit for extended periods, working at a computer
Ability to work in a typical office environment, which may include occasional visits to manufacturing or testing areas
Able to stand for long periods of time
Comfortable working at heights (e.g., on ladders or lifts)
Walking, standing, going up and down stairs, sitting, kneeling, crouching, bending for extended periods
Ability to lift and carry up to 25 pounds on a regular basis and heavier weights on an infrequent basis
Ability to work in a fast-paced environment
Working in varying temperatures while on-site
Wearing PPE complying with the customer’s and Mohawk Technology’s safety standards, including safety-toed boots, hard hat, safety glasses, ear plugs, hair nets, and smocks
Moving around facilities on-site on a frequent basis, which can be very large with multiple floors and rooms
Working Hours:
Typical office hours:
8 am – 5 pm
Occasional nights and weekends
On-site hours:
Hours may vary, but are typically 12+
Occasional nights and weekends
Preferred Knowledge and Skills:
3D CAD experience, including modeling mechanical parts, assemblies, fabrication drawings, assembly drawings, etc. (Experience with SolidWorks preferred)
Mechanical aptitude and a strong understanding of mechanical principles
Genuine interest in learning about the industrial automation and manufacturing industry
Current freshman or sophomore pursuing a Bachelor's degree in Mechanical Engineering or a related field
Experience with FEA or simulation software
Knowledge of GD&T (Geometric Dimensioning and Tolerancing)
Familiarity with manufacturing processes (e.g., machining, welding, fabrication) is a plus
Excellent verbal and written communication skills
Experience with Microsoft products
Knowledge of Food/Dairy Industry
Pay Range:
Negotiable, based on experience
Benefits:
401(k) plan with up to 4% match
Profit sharing
Apply Today!
Learn More about Mohawk Technology
-
![]()
From 2013 to Today: The Mohawk Technology Timeline
Explore the story of Mohawk Technology, from dairy process controls to comprehensive automation solutions.
-
![]()
The Mohawk Technology Team: Get to Know Us
We believe our team is our greatest asset. Meet the passionate individuals who are dedicated to making Mohawk Technology a leader in the industry.
-
![]()
More Than Automation: Making a Difference in Manufacturing
We go beyond automation, delivering solutions that empower food & beverage companies to thrive.
